Laps - Plated - 18" - Magnetic

* Nickel Bond
* 1.00" hole
* The diamond disk in 45 grit is a very rough diamond used for heavy removal of glass from surfaces. It will create significant edge chipping that will need to be cleaned up with a rough to medium grit diamond disk. Disks are magnet backed for easy application and removal on lap grinder wheel heads.
* * Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 80 grit is a rough grit diamond used for shaping and removal of glass with less edge chipping than a 60 grit.
* Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 80 grit is a rough grit diamond used for shaping and removal of glass with less edge chipping than a 60 grit.
* Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 100 grit is a medium grit diamond used for surface preparation levelling of glass pieces. Disks are magnet backed for easy application and removal on lap grinder metal wheel heads
* Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.

*  1.0" hole size.
*  Spacers for smaller size holes available.
*  The diamond disk in 140 grit is a medium-fine grit diamond used for small surface area grinding and as an intermediate step from a rougher diamond to a finer diamond on larger surface areas. Disks are magnet backed for easy application and removal on lap grinder metal wheel heads.
*  Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk.
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 270 grit is a fine grit diamond used after rough or medium grit diamond pads to prepare surfaces for pre-polish stage with a resin diamond Smoothing Pads. Disks are magnet backed for easy application and removal on lap grinder metal wheel heads.
* Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 325 grit is a fine grit diamond used after rough or medium grit diamond pads to prepare surfaces for pre-polish stage with resin diamond Smoothing Pads. Disks are magnet backed for easy application and removal on lap grinder metal wheel heads.
* Manufactured in U S A by a major manufacturer.

* Nickel Bond
* 1.00" hole
* The diamond disk in 500 grit is a very fine diamond used mainly for lapidary work and is not recommended for glass. Disks are magnet backed for easy application and removal on lap grinder wheel heads.
* Electroplated on fiberboard substrate with copper laminate for rust-free operation over the lifespan of the disk
* Manufactured in U S A by a major manufacturer.