Nova Laps - Magnetic - 6"

Our Magnetic Nova Laps give you the fast polishing performance of Novas combined with the convenience of an easy on easy off magnetic lap. They attach right onto most flat laps and are easily removed. Magnetic Nova Laps have a 1⁄16" thick backing of solid rubber containing magnetized iron particles so the laps will adhere to a cast iron, steel or nickel plated lap. The rubber is coated with a thick layer of our special Nova resin-bond diamond formula for fast action and lasting service. The surface of the Magnetic Nova is made with a grid pattern for better performance. You can use the Magnetic Novas on your present flat lap setup
in most cases, but they will not work on aluminum or diamond coated discs. If your lap set-up will accommodate an attachment using a 1⁄4"-20 bolt (such as on the Genie, Titan and Pixie), then you can use one of the special back plates listed below on the right. These steel faced back plates along with the Magnetic Novas will give you a non-interrupted polishing surface for maximum efficiency. Our recommended general purpose grit sequence for sanding and polishing most flats is to use Magnetic Nova Laps in 30, 60, 280, 600 and 1200 grits, followed by our Super Premium Cerium Oxide Polish on a felt pad. For deep saw marks you may add a coarse Diamond Plated Disc. Other sequences may be used with excellent results depending on the material to be polished. Shown at right is a Genie with a 6" steel faced back plate attached to the right hand wheel adapter of the machine. 

Magnetic Novas (6" size shown lying on machine pan) can be used on the steel-faced back plate, and are easily attached and removed from the plate.